Disc Production; Burning Discs; Pausing The Autoloader To Add Media; Unloading The Discs - Rimage Professional 2450 Guia Del Usuario

Disc Production

9.1: Burning Discs

1. Double click the QuickDisc shortcut on your desktop.
2. Choose the desired media type (CD, DVD, Blu-Ray, etc.) from
the QuickStart menu
Tip: The media type required for your disc project must match the media
placed in your supply bin. To change the media type and bin settings to
match the media placed in each input bin, refer back to page 8.
3. Select the appropriate data option.
• For data discs, choose Create a Data CD/DVD/Blu-ray CD/DVD/Disc
that contains files and folders in accordance with the loaded media.
• For multimedia discs, choose Create an Audio CD/Video DVD/Video
Blu-ray Disc in accordance with the loaded disc(s).
• To copy an existing disc, choose Copy a CD/DVD/Blu-ray Disc in
accordance with the loaded disc(s).
• For other options, please refer to the QuickDisc Help menu.
4. When the Add Content dialog box opens, click on the Add button to find
and select the data or media you wish to burn to your disc(s).
5. Highlight the folder or files you want to add to your disc(s) and select
Add. As you add files and folders, the Disc Size and Free Space numbers
are updated.
6. When you are finished adding the required files and folders, select Done.
7. Click on the Next icon
8. In the subsequent window, click Choose and select the appropriate label
template, if required, or drag and drop the file into the Label Preview
window. Then click Next.
9. Next, enter the number of copies, title the disc if desired, and then click
on the Record icon.
2004849_A
Tip: After submitting the job for production, a dialog box will pop up
asking if your want to save the project. Doing so will allow you to
resubmit the same job with the same perimeters in the future
without going through all of the previous steps.

9.2: Pausing the Autoloader to Add Media

You can pause the system to add discs to the carousel.
1. Open the front door. Production will pause and you will be able
2. Close the front door and production will resume.

9.3: Unloading the Discs

1. Open the front door.
2. Press the rotate carousel button to rotate the desired bin into an
3. Remove the discs from the bin.
4. Repeat steps 2 - 3 until the competed discs are removed.
5. Close the front door.

9.4: Powering Off the System

1. Close all open applications.
2. Press the main power switch on the back of the system to power
Important: If the printer is idle for more than 30 minutes, it enters
sleep mode. When this occurs, the printer will take up to 4
minutes to warm up after a job is sent.
For more information visit rimage.com/support
to add additional discs.
accessible position.
off the system, including the integrated printer.
9