Elta 7538N Manual De Instrucciones página 23

01-7538N-GE-EN 7/29/06
INSTALLATION
INSTALLATION WAY
PLEASE HAVE THE WIRING CONNECTION OF THE POWER SUPPLY, SPEAKERS AND ANTENNA AS FOR THE
REQUIREMENT OF THE MANUAL, THEN INSTALL THE METAL SLIDING HOUSING INTO THE CAR ACCORDING TO THE
DIAGRAM.
METAL STRAP
DASH BOARD
SLIDING METAL HOUSING
TO DRAW THE CHASSIS OUT OF THE SLIDING
METAL HOUSING, INSERT THE LEFT AND RIGHT
KEY PLATES INTO THE RIGHT POSITION OF THE
2 SIDES OF CHASSIS.
NOTE
REMOVE THE SLIDING
METAL HOUSING
AWAY
PRESS RESET BUTTON TO RESUME
THE DISTORTED PROGRAM WHEN
THE LCD DISPLAY IMPROPERLY AND
SOME BUTTONS ARE INVALID.
TO INSERT DISC INTO COMPARTMENT OR EJECT DISC OR
REMOVE THE FRONT PANEL AWAY FROM THE CHASSIS, PRESS
THE OPEN BUTTON TO FLIP DOWN THE FRONT PANEL.
11:45 AM Page 023
TO BOOST UP THE CAPABILITY OF
ANTI-JAMMING, PLEASE FIX THE
METAL STRAP ON THE METAL
CONNECTED TO THE BOTTOM
BRACKET OF THE CAR.
TO INSTALL THE FRONT PANEL BACK TO THE UNIT CHASSIS,
FIRSTLY MAKE THE LEFT GUIDE BLOCK HOLE AND THE LEFT
REMOVE AWAY 2 SCREWS FOR
CYLINDER LINE UP AND THEN COMBINE THEM.
PROTECT THE DECK BEFORE
THEN MAKE THE RIGHT GUIDE BLOCK HOLE AND THE RIGHT
OPERATING IT.
CYLINDER LINE UP AND THEN COMBINE THEM.
FINALLY FLIP THE FRONT PANEL UP TO COMBINE WITH
CHASSIS.
EJECT BUTTON
RESET BUTTON
SELECT THE PROPER
FIXER FOR FIXING THE
SLIDING METAL HOUSING.
UNIT CHASSIS
PLASTIC TRIM OUT
FRONT PANEL
TO REMOVE THE FRONT PANEL
AWAY FROM THE CHASSIS,
FIRSTLY PUSH THE FRONT PANEL
HOLD RIGHTWARDS.
THEN PULL THE LEFT SIDE OF
THE FRONT PANEL OUTWARDS.
023.