Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Do not over-tighten bolts-doing so many cause unnecessary damage to the wall.
CAUTION:
Avoid excessive torque.
CAUTION:
Do not release the wall plate until it is properly mounted and secured to the wall.
b Concrete/Brick Installation
NOTE:
The concrete anchors must be used for concrete installation.
1
Begin by placing the wall plate into position against the wall, using the bubble level to keep it level.
2
Mark off four holes to be used for securing the mount and place the wall
3
Next,drill holes using an electric drill and 12mm masonry bit 50mm deepth.
Insert a concrete anchor into to rach hole.
4
If necessary, a hammer can be used to liahtly tap each anchor into place so that they are flush with the
5
wall.
Once all of the anchors are in place ,move the wall plate back into position .
6
7
Attach the bolt into the washer(G) that is placed in the wall .
8
Do not tighten until all screws are in plate .
E
5mm
50mm
TENDING INSTRUCTION
Please check whether screws are fixed well each two months
If you have any other doubles regarding the products or the installation,please consult to the special
franchiser
F
G
50mm
12mm
BALANCE-ADJUSTING
Step2 Display bracket Installation
To ensure optimal installation,this kit includes various screws of differe diameters and lengths.
1
Place your TV screen down on a soft,flat surface,and locate the threaded mounting points that are
2
located on the back of the display.
Determine which screw (A/B/C)is of the correct length by carefully inserting a straw,or
3
toothpick,and mark how deep the mounting point is.
If your display has a curved back or a recessed thread mounting point.
4
5
According to the size of display's hole,choose the corresponding screw and hole on the rectangle washer,
then thread them in line as showed
Step3 Final Installation & adjustment
Hook the TV Rails over the top of the wall plate.The TV Rail could be tilted down by 10 degree. And
1
tighten the contral screws by driver to adjust the tilting hardness.
Lock the bracket by the safe lock bar.
2
D
A/B/C
Tabla de contenido
