Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BEFORE
FIRST USE
•
Unpack all packaging materials and clean the coffeemaker thoroughly. Allow to dry
before first use.
•
Before the first use, please check if all the parts of the appliance are in good
condition. If not, please contact the seller or manufacturer.
•
It is recommended to run the coffeemaker for one cycle with just plain water and no
coffee to clean the internal parts of the coffeemaker.
HOW TO USE YOUR
COFFEEMAKER
•
Open the filter compartment from left side and take out the built-in removable
filter, then put ground coffee into the filter evenly.
•
Reinstall the filter, close the filter compartment and click it back into place.
•
Open the lid.
•
Fill up the glass carafe with cold water and pour in to the water reservoir tank.
•
Put the carafe with the lid onto the hotplate; the lid of the carafe pushes the lever
and opens the drip hole.
•
Plug the coffee maker into an electric outlet and switch to ON
•
After a few minutes hot coffee drips into the carafe through the drip hole.
PAUSE 'N SERVE FEATURE:
During the middle of brewing process, you can pause the cycle by simply removing the
carafe out of the coffee maker to sneak a cup of coffee. A special built-in device will
pause the brewing cycle and keep coffee from dripping into the carafe.
AFTER USE
•
When the last drop has dripped out of the filter, the carafe can be removed from the
hot plate; the lever goes back automatically and closes the drip hole.
•
Put the carafe with the remaining coffee back on the hotplate to keep the coffee
warm.
•
After drinking, please switch the appliance off and unplug the appliance. The pilot
light will turn off.
•
Remove the coffee filter and the remaining coffee grounds, then clean the filter.
•
If more coffee is required, please switch off the appliance first. After cooling the
appliance for 5 minutes, pour cold water into the water tank.
www.maxi-matic.com
5
Tabla de contenido
