RiverRidge 06-029 Manual Del Usuario página 9

STEP 9
STEP 9
1. Attach top board (1) to both side panels (2), (3), cross car (4) and rear cross bar (10) by
inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on
both side panels (2), (3), cross car (4) and rear cross bar (10).
2. Insert 4 cam locks (B) into cam lock holes on both side panels (2), (3) and rotate
clockwise to secure cam bolts.
STEP 10
STEP 10
1. Insert 4 plastic shelf holders (F) into desired positions and put shelf (8) onto plastic shelf
holders (F).
2. Place drawing with hole positions on wall in desired position and drill 2 holes on wall.
3. Insert 2 plastic anchors (P) into holes on wall and attach cabinet in place by inserting 2
long screws (N) through holes on rear cross bar (10) and tighten cabinet to wall.