Kasanova YIE000009NOC Manual Del Usuario página 13

WATER KETTLE
13
OPERATION
The appliance is intended only for domestic use, not for professional
use.
FEATURE
1. Spout
2. Power base and cable
3. Detachable filter
4. Top lid
5. Lid release button
6. Handle
7. Water window
8. On/off switch with polite light
BEFORE USE FOR THE FIRST TIME
Before first use, remove possible manufacturing process residues by
boiling 3 full kettles of water. Dispose this water.
Tip: You can use vinegar or special descaling agents for the first time.
USE
1. Turn the jug so that the spout faces away from you.
2. Press the button to open the lid (5).
3. Fill the jug with the required quantity of water (at least 0.5 liters,
and a maximum of 1.5 liters). Never fill the water boiler over the "max".
Otherwise the hot water can spatter out of the base.
ATTENTION
Make sure that you do not spill any water on the base.
4. Release the button to open the lid.
5. Place the jug on the base, and insert the plug in the wall socket.
Push down the on/off switch. The on/off pilot light will illuminate.
6. The jug kettle is now switched on, and the water will now begin to
heat. The jug kettle switches off automatically a few seconds after the
water has come to the boil. The on/off pilot light will now extinguish.
7. Remove the jug from the base by the handle, and pour the water
out.
ATTENTION
Be carefully you do not contact the hot water. It can cause serious
burning wounds
8. When you wish to heat the water without it coming to the boil you
can switch off the jug kettle at any time you require.