ShelterLogic AutoShelter 62680 Instrucciones De Montaje página 4

1. lAYoUt rooF FrAMe:
Assembly is easiest if you layout all pipe
parts as shown in the area you intend
to erect the shelter. Detail A shows the
entire frame assembly. Detail B shows
the roof frame parts. Start with the roof
and begin with the center peak.
DETAIL A
SIDE BEND CONNECTOR
802631
TOP BEND CONNECTOR
800600
2. ASSeMBle rooF:
A. Bolt roof assembly together as shown in
Detail C. Install the top rail over the middle
ribs and underneath the first and last ribs.
NOTE: Use bolts for these connections.
IMPORTANT: Install all ladder bolts with nut
toward center of frame.
B. Assemble each side of the roof as
shown in Detail D. Nest the cross rail into
the ShelterLock . Install the nut onto the
™
bolt and tighten. Repeat these steps for the opposite side and all of the remaining
ribs. The side rails for the last rib will have
two plain ends.
DETAIL C
802630
03032
03032
01010
01010
ASSeMBlY InStrUctIonS
DETAIL B
802631
802631
802631
802631
802631
Page 4
802632 800600
800599
800599
802632 800600
800599
800599
802632 800600
800599
800599
802632 800600
800599
800598
802632 800600
802632
800599 800599
800599 800599
802632
800599 800599
800599 800599
802632
800599 800599
800599 800599
802632
800599 800599
800598 800598
802632
DETAIL D
802497
01010
05-62680-0B
802631
802631
802631
802631
802631
800597