OPERATION
The appliance is intended only for domestic use, not for professional use.
The following description is associated with the image on page 2:
1.
Housing
2.
Crumb tray
3.
Bread carriage
4.
Bread-carriage lever
5.
'Reheat' button with pilot light
1.
Unpack the device and remove all packaging parts.
2.
Clean the appliance before using for the first time (see 'Cleaning and maintenance').
Toasting bread
1.
Place the appliance on a flat, level surface.
2.
This appliance must be connected to an earthed socket.
3.
Set the browning with the adjustment dial (8).
•
The browning is lowest when the dial is set to the lowest position (setting 1).
•
The browning is highest when the dial is set to the highest position (setting 7).
•
In the event of doubt, always begin at a lower setting.
•
Older bread will need to be toasted at a lower setting than fresh bread.
•
Brown bread will need to be toasted at a higher setting than white bread.
4.
Put two slices of bread in the toaster's bread carriage (3).
5.
Lower the bread carriage by pressing the lever (4) until the lever locks into place. The appliance will
now start toasting the bread; it will automatically switch off once the toast is ready. The bread carriage
will then rise automatically. Remove the toast from the toaster.
6.
Remove the plug from the wall socket. Allow the toaster to cool down before storing it.
WARNING:
•
You can stop the toaster at any time you require. Press the 'Cancel' button (7) to stop the toaster.
•
Switch off the toaster by pressing the 'Cancel' button if smoke is emitted from the toaster or the bread.
•
If toast remains caught in the toaster, then you should remove the plug from the wall socket and allow
the toaster to cool. You can now carefully remove the toast from the toaster. Do not use sharp and/or
metal implements.
Reheat function
Once you have lowered the bread carriage by pressing the lever (4) press the 'Reheat' button (5). On
pressing the button the 'Reheat' indicator light will illuminate.
Defrost function
You can use this to thaw deep-frozen bread. Once you have lowered the bread carriage by pressing the
lever (4) press the 'Defrost' button (6). On pressing the button the 'Defrost' indicator light will illuminate.
Heating rolls or French bread
1.
Fit the roll holder to the toaster.
2.
Lay the rolls or the French bread on the roll holder.
3.
Use the same procedure as for toasting bread, but without putting slices of bread on the bread
carriages.
CLEANING AND MAINTENANCE
1.
Disconnect from mains power supply and let the appliance cool down.
2.
Take the crumb tray (2) out of the appliance, and remove any breadcrumbs.
3.
Clean the exterior of the appliance with a damp cloth, and dry with a clean cloth. Make sure no
moisture gets into the appliance.
4.
Slide the crumb tray back into the appliance.
WARNING:
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
SERVICE
If an unexpected problem occurs, please visit www.bestron.com/service for assistance.
6.
'Defrost' button with pilot light
7.
'Cancel' button with pilot light
8.
Browning adjustment dial
9.
Roll holder
10
EN