Installation; Assembling The Fixture; Replacing The Battery - HAMPTON BAY HD28572 Guía De Uso Y Cuidado

Installation

1

Assembling the fixture

NOTICE: The spike is located inside the post.
WARNING: Never push the fixture into the ground by the
fixture head or use a hammer to insert the spike into the
ground.
Install the top cap (A) on the body (B) by turning it
clockwise.
Attach the plastic spike (D) to the post (C) by pressing them
together and press the post (C) into the bottom of the body
(B) base.
2

Replacing the battery

NOTICE: This operation should be done in the morning on a sunny
day. This will allow the light to receive a full 8 hours of sunlight so
that the rechargeable battery/batteries can reach maximum capacity.
Remove the top cap (A) by turning it counterclockwise.
Remove the battery cover.
Remove the old 500 mAh battery and replace it with a new
AA size 1.2V, Ni-Mh, 500 mAh rechargeable battery.
NOTICE: Clean the battery contacts and those of the device prior to
battery installation.
Be sure to insert the battery in the proper direction.
Replace the battery cover.
Replace the top-cap by turning clockwise.
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
C
D
Battery Cover
Battery
HAMPTONBAY.COM