Troubleshooting; Technical Specifications - ECG BTS Elysium M1 Black Manual De Instrucciones

TROUBLESHOOTING

Problem
The speaker cannot connect to the
Bluetooth device and play music.
The micro SD card does not work.
The speaker does not play FM
stations.

TECHNICAL SPECIFICATIONS

Bluetooth version: 4.2
Power: DC 5 V / 1 A (Max)
Impedance: 6 Ω ×2 + 4 Ω
Power: 2,5 W ×2 + 10 W
Analogue input AUX IN: 3.5 mm
FM frequency range: 87.5–108 MHz
Integrated battery: 3.7 V / 4400 mAh
Size: 205 × 128 × 64 mm
Charging time: 5–6 hours (using the adapter 5 V / 1 A)
Playing time: 8 hours at 70 % volume
Weight: 970 g
Solution
1. Check the specifications / manual of the Bluetooth device (mobile
phone or computer) and make sure the device supports A2DP
stereo audio transmission. If the device does support A2DP,
enable A2DP stereo mode.
2. Make sure the speaker is in Bluetooth mode. If there are many
Bluetooth devices in your vicinity, it can be difficult to find the
correct device. In such a case, turn off all other devices.
1. Make sure that the Micro SD card is in good condition. Check the
audio files for supported format: MP3/WMA/WAV/APE/FLAC.
2. In addition to the above mentioned, there may be a problem with
Micro SD card compatibility.
When formatting the Micro SD card or USB flash drive, we recommend
using a FAT 32 file format.
1. Make sure the speaker is in an area covered by FM signal.
2. Adjust the speaker orientation to improve the antenna direction.
This may improve reception quality.
3. Make sure that, while in FM mode, you long pressed 7 and
activated the auto-tuning of FM stations.
GB
37