Idiomas disponibles
Idiomas disponibles
Install the Fixture
1A
NEUTRAL WIRE
ELECTRICAL BOX
1
1
HOT WIRE
For item # 8511701, use
MAX
60 Watt Type A19 Medium Base Lamp.
For item # 8611701, use
MAX
75 Watt Type A19 Medium Base Lamp.
For item # 8711701 & 8811701, use
MAX
120 volt
100 Watt
Type A19
Medium Base Lamp.
Secure the mounting plate to the electrical box with two mounting plate screws.
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
3
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
4
5
Mount the fixture base onto the mounting plate studs and secure it using the cap nuts.
Place the frame, shade, and spacer onto the socket (in that order), then secure them in place by screwing the collar
6
nut onto the socket. NOTE: For item 8511701, use provided shade tool to tighten the collar nut.
Screw the lamp into the socket.
7
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
8
MOUNTING
PLATE STUD
WHITE WIRE
3
4
MOUNTING
MOUNTING
PLATE
PLATE SCREW
8
SHADE TOOL
120 volt
120 volt
CAP NUT
FIXTURE BASE
6
BLACK WIRE
6
6
7
2
SOCKET
FRAME
SHADE
SPACER
COLLAR NUT
LAMP
