Commercial Electric SPTM-1401 Guía De Uso Y Cuidado

Safety Information
Please read and understand these instructions before attempting to
install or use this light fixture.
1. This LED fixture is suitable for outdoor use and wet locations.
2. Do not disassemble this LED fixture. There are no user-
serviceable parts inside. The LED bulb is not replaceable.
3. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING: Risk of Fire, Electric Shock, or
Injury to Persons. Turn the power off at the
circuit breaker or fuse and install in
accordance with local electrical codes.
WARNING: Do not install near flammable
material.
Pre-Installation
TOOLS AND MATERIALS REQUIRED (NOT INCLUDED)
Sealing Compound
Installation
1
PLACING THE SPOT LIGHT
□ Thread the spot light (A) into the
cover of your desired installation
location. Coat the threads with
sealing compound (not included)
and tighten the nut on the spot
light (A).
3
CONNECTING THE WIRES
□ Wire the spot light (A) to the
supply lines in the electrical box.
Connect white to white (neutral),
black to black (live), and yellow
green to yellow green (ground).
□ Secure all wiring connections
with wire nuts (not included).
Wire Nuts
A
A
Item # 1002434173/1002818377/1002823361
Model # SPTM-1401/SPTM-1402/SPTM-1403
Use and Care Guide
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
5-Year Limited Warranty
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a
period of 5 years from date of purchase. Purchase receipt is required for all warranty
claims.
WHAT IS NOT COVERED
This guarantee does not include repair service, adjustment and calibration due to misuse,
abuse or negligence, or LEDs. Unauthorized service or modification of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include
reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service,
or return shipping charges. No service parts are available for this product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
2
AIMING THE SPOT LIGHT
□ Aim the spot light (A) to your
desired angle by rotating the
light up and down, left and
right.
4
COMPLETING THE INSTALLATION
□ Close any unused holes with closure plugs (not included).
□ Seal all openings to comply with a wet location installation.
□ Use a caulking compound to provide a water tight seal
between the spot light and the mounting surface.
Spot Light
A
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.