Promise Technology Pegasus J4 Guia De Inicio Rapido página 7

6. With the drive in position, push with your fi ngers on the edge opposite
the drive contacts until the drive is fi rmly seated in the drive bay.
7. Attach the anchor screw to secure the drive in place.
8. Repeat steps 5 and 6 for each remaining hard drive.
9. Replace the housing top into its proper positing.
10. Hold the unsecured housing in place and turn the J4 upside down
once more.
11. 11. Replace the screws and snug them tight. The Replace the screws and snug them tight. The J4 is ready to be
connected to a computer and a power source. connected to a computer and a power source.
5