Enlaces rápidos
Linen Tower Operators' Manual
Manual de Operadora de Linen Tower
Inspect product prior to installation. Contact
prior to returning product to retailer.
Inspeccione el producto antes de su instalación. Póngase en contacto con
[email protected] antes de devolver el producto al vendedor.
Model :RFBW01012
Model :RFBE 01012
Model :RFBG 01012
Page 1
Manuales relacionados para Runfine Linen Tower RFBW01012
Resumen de contenidos para Runfine Linen Tower RFBW01012
- Página 1 Model :RFBW01012 Model :RFBE 01012 Model :RFBG 01012 Linen Tower Operators’ Manual Manual de Operadora de Linen Tower Inspect product prior to installation. Contact [email protected] prior to returning product to retailer. Inspeccione el producto antes de su instalación. Póngase en contacto con [email protected] antes de devolver el producto al vendedor.
-
Página 2: Parts List
PARTS LIST A. TOP LEFT SIDE PANEL / PANEL LATERAL IZQUIERDA SUPERIOR B. TOP RIGHT SIDE PANEL / PANEL LATERAL DERECHO SUPERIOR C. TOP PANEL / PANEL SUPERIOR D. BOTTOM PANEL / PANEL INFERIOR E. FIXED SHELF PANEL / PANEL DE ESTANTE FIJO F. - Página 3 HARDWARE 1. DOOR/ DRAWER KNOB / PERILLA DE LA PUERTA/CAJÓN 3PCS 2. DOOR KNOB SCREW (18MM L) / TORNILLO PARA LA PUERTA PERILLA (18MM L) 2PCS 3. DRAWER KNOB SCREW (35MM L) / TORNILLO PARA LA PUERTA PERILLA (35MM L) CAM LOCK NUT &...
- Página 4 TOOLS REQUIRED (NOT INCLUDED) / HERRAMIENTAS REQUERIDAS (NO INCLUIDO) FLAT HEAD DESTORNILLADOR PHILLIPS DESTORNILLADOR SCREWDRIVER PLANO SCREWDRIVER PHILLIPS Por favor, lea las instrucciones antes del montaje. Please read instructions before assembly. Realizar el montaje sobre una superficie enmoquetada para Perform assembly on a carpeted surface to prevent scratching. evitar que se raye.
- Página 5 ASSEMBLY OF THE TOP SIDE PANELS, THE FIXED SHELF & THE BACK TOP CROSS BAR （STEP 1)- #B MONTAJE DE LOS PANELES LATERALES SUPERIORES, EL ESTANTE FIJO & LA VUELTA SUPERIOR LA BARRA TRANSVERSAL (PASO 1)-#B Attach the top side panels (A) &(B) to the fixed shelf panel (E) &...
- Página 6 ASSEMBLY OF THE TOP PANEL（STEP 2) MONTAJE DEL PANEL SUPERIOR (PASO 2) Screw the door magnet (6) to the top panel (C) using the magnet screw (6). Insert the cam lock bolts (4) into the pre-drilled hole of the top panel (C). Attach the top panel (C) to the top side panels (A) &...
- Página 7 ASSEMBLY OF THE LOWER SIDE PANEL, THE LOWER BACK TOP CROSS BAR, THE LOWER FRONT UP CROSS BAR, THE FRONT APRON PANEL, AND THE BOTTOM PANEL （STEP 3)-#A ASAMBLEA DEL PANEL LATERAL INFERIOR, la espalda baja TOP BAR CRUZ, LA BAJA FRENTE ASCENDENTE CRUZ BAR, EL PANEL FRONTAL DELANTAL, y el panel inferior (PASO 3) - # A Push down the plastic part in the middle of the drawer slide, knock down the drawer slides (11) as shown below.
- Página 8 ASSEMBLY OF THE LOWER SIDE PANEL, THE LOWER BACK TOP CROSS BAR, THE LOWER FRONT UP CROSS BAR, THE FRONT APRON PANEL AND THE BOTTOM PANEL （STEP 3)-#B ASAMBLEA DEL PANEL LATERAL INFERIOR, BARRA TRANSCERSAL SUPERIOR POSTERIOR, LA BAJA FRENTE ASCENDENTE CRUZ BAR, EL PANEL FRONTAL DELANTAL Y EL PANEL INDERIOR(PASO 3) - # B Attach the lower left side panel (H) and the lower right side panel (I) to the bottom panel (D), the...
- Página 9 SECURE THE TOP AND LOWER PORTIONS（STEP 4) Asegure la parte superior e inferior (PASO 4) Attach the top portion and leg by inserting the camlock bolts (4) and the wood dowels (5) located on the top side panels and the lower side panels as shown (Figure 9).
- Página 10 ASSEMBLY OF THE BACK PANEL（STEP 5) MONTAJE DEL PANEL POSTERIOR (PASO 5) Attach the back panel ( T )& (U) to the cabinet using the wood dowels (8) as shown (Figure 11). Fije el panel trasero (T) & (U) al mueble utilizando los tacos de madera (8) como se muestra (Figura 11).
- Página 11 ASSEMBLY OF THE DOOR PANEL AND THE DRAWER（STEP 6)-#B ASAMBLEA DEL PANEL DE PUERTA Y EL CAJÓN (PASO 6) - # B Attach the top door panel (M) to the top side panels (A) & (B) using the door hinges and screws (10). Insert the drawer into the cabinet assembly and making sure that drawer is inline with drawer guides on cabinet assembly as shown (Figure 14).
- Página 12 WALL MOUNT INSTALLATION（STEP 7) INSTALACIÓN MONTAJE EN PARED (STEP 7) Locate a desired position on the wall on which to mount the cabinet. If wall studs are located at the exact screw positions of the cabinet cross bars, then mount the cabinet to the wall using mounting screws (9).