TrekStor DVB-T Stick Manual Del Usuario página 13

6) To put the DVB-T Stick into Operation
To use the DVB-T Stick, you must make the following preparations:
a) Install the app "AirDTV" (free download on the TrekStor website) on your tablet.
b) Connect the magnetic base antenna with the coaxial adapter.
c) Connect the coaxial adapter with the DVB-T stick.
d) Connect the DVB-T stick with the micro USB host port on your tablet.
The tablet detects the DVB-T stick and the app will start automatically.
A configuration wizard supports you when setting up the app for the first time.
i
If you are in a place with a good DVB-T signal, you can use the magnetic
i
base antenna and the coaxial adapter instead of the telescopic antenna to
receive the signal.
7) Watch TV with DVB-T Stick
7.1) Tuning
If you have not already done so during the first installation, you must
perform a channel scan.
a) Open the AirDTV app and tap the top right "s
b) Then tap left on "c
c) Tap the country icon at the bottom center. Choose from the list that
appears and select the country where you are located.
d) Tap "s " on bottom right. The DVB-T Stick is searching for all available
can
channels in your area.
The search may take a few minutes.
i
e) After the search is complete, all available stations are displayed. Confirm
with "d " or repeat the search process if necessary with "c
onE
s ".
hannEl can
".
Ettings
hannEl
s ".
can
EN
13