③Connecting To A Projector Or Monitor; ④Connecting To A Computer - Elmo MX-P Guia De Inicio Rapido

③CONNECTING TO A PROJECTOR OR MONITOR
To the AC adapter
DC power
cable
HDMI cable or
RGB cable
日
本
語
1. Connect the MX-P to a projector or monitor with the HDMI cable or RGB cable.
2. Connect the supplied DC power cable to [
AC adapter. Then connect it to a wall outlet.
3. The MX-P turns on. (MX-P of LED： blue)
④CONNECTING TO A COMPUTER
The MX-P is compliant to uvc (video class) standard. You can transfer the image via USB
by connecting the MX-P to a computer using the USB3.0 cable (bus power)
1. Connect the microB connector terminal of the USB3.0 cable to [
the side of the MX-P.
2. Connect the typeA terminal of the USB3.0 cable to the USB port of your running
computer.
3. The MX-P will be turned on after the connection is established.（MX-P of LED：blue）
CAUTION
・When using the USB cable, no video is output from the RGB/HDMI ports.
・When connecting to the USB2.0 port (MX-P of LED：green),the frame rate may be
decreased depending on the output resolution.
・The frame rate may be decreased depending on the computer used.
2
1
Resolution/Output mode selection
When connecting RGB only:
select between XGA and UXGA
When connecting HDMI:
select between Full and Normal (angle of view)
Flicker correction
Select the same value as the power supply frequency
of the location where the product is used. (50Hz/60Hz)
USB3.0 cable
2
Type A
20
NOTE
Slide the cover according to the port used.
DC IN 5V ⇔ USB
3
]. Connect the USB plug to the supplied
Micro-B
1
3
] connector in