Complete Installation - Huskie Tools 45202 Manual De Instrucciones

Installation (continued)
6
Continue Installation
□ Insert the next panel (A) into the vertical J-trim (B) at one side.
□ Curve the panel slightly to the vertical J-trim (B) at the other side. The second panel (A) should interlock over the first panel's
screw channel, but leaving the hook channel accessible. Properly interlocked panels will conceal all screws.
□ Press down on the top of the second panel (A) to ensure that it is properly interlocked with the one below.
□ Check to ensure the panel (A) is level along the entire width of the panel. Repeat this process after installing every third panel (A)
□ Fasten the panel (A) to all wall studs using screws (BB).
□ Repeat this process for panels 3-10.
NOTE: Screws installed at the top of the vertical J-trims may
have to be removed to complete clean installation of top panels.
8

Complete Installation

□ Install your horizontal top L-trim (C) by simply clipping it into the lip above the screw cavity.
NOTE: Vertical J-Trims not included in image to show clear installation
of horizontal to L-trim.
C
x 1
7
Please contact 1-888-HD-HUSKY for further assistance.
x 9
x 63
A
Properly overlapped
HUSKYTOOLS.COM
BB