GPO KW938BT Manual Del Usuario página 10

Connecting with the Bluetooth Headphones
1. Charge the Bluetooth Headphones via the USB Socket (17) with
the provided USB charging cable, the Power LED Indicator (16)
will be light on in Red during charging. It will be light off after the
headphones has been fully charged
2. During playing the cassette tape, slide the BT On/Off switch (9) to
the "ON" position, the Bluetooth LED Indicator (10) will be flashing
3. Put on the fully charged Bluetooth Headphones, touch & hold on the
Touch Control Area (15) until hearing voice prompt "Power On", the
Power LED Indicator (16) will be flashing in Red & Blue quickly.
4. The connecting will be started automatically between the Bluetooth
Cassette Player & the Bluetooth Headphones.
5. You will hear voice prompt "Start Pairing" & the connecting process
can be taking up to 20 seconds.
6. Then you will hear voice prompt "Parties Connected" when the
connecting process is completed, the Bluetooth LED Indicator (10)
on the Bluetooth Cassette Player will light on & the Power LED
Indicator (16) on the Bluetooth Headphones will be flashing slowly in
Blue only.
7. You can now listen to the music on the cassette tape by using your
Bluetooth Headphones.
8. Adjust the Volume Control Knob (8) to your preferred sound level.
9. To turn off the Bluetooth Headphones, just touch & hold again on the
Touch Control Area (15) until hearing voice prompt "Power Off", the
Power LED Indicator (16) will be light off.
10