Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
EN
8. MONO/STEREO. Push this button in order to select the audio type (MONO or STEREO).
9. BALANCE. This knob controls the mix of stereo audio available from the channel. Move to the Left
or Right to select the L/R level. This knob incorporates central point.
10. LEVEL INDICATOR. This vumeter with LED shows the output level. Pay attention to the red LED
for audio peaks.
11. ZONE EQ. 3 tone equalizer (Bass, Mid, Treble) with central point in order to equalizer the output
signal.
NOTE: Controls 7, 8, 9, 10 and 11 are present in ZONE A and ZONE B outputs.
12. HEADPHONE GAIN. This knob controls the gain of the headphones connected in headphone
input (13).
13. HEADPHONES. Jack 1/4" connector which allows to connect a headphones for monitor.
REAR PANEL
R
65
Use only with a 250V fuse
14
16
15
1. TALKOVER THRESHOLD. Determines the point in which auto-talkover activates. The more sensitivity
adjustment you need to speak into your microphone to activate auto-talkover.
2. TALKOVER ATTENUATION. Sets the front panel MIC 1 to automatically reduce other source level
when the mic is used. Positions are available for either OFF, -12 dB and -40 dB (complete reduction)
3 - 8. MIC INPUT. Allows connection XLR3 mic (MIC 2 and MIC 3 respectively)
4 - 7. PHANTOM SELECTOR. This switch allows to select ON position if you want to connect a condenser
microphone in MIC 2 or MIC 3.
5 - 6. LINE INPUT. Use these terminal blocks to connect LINE level signal (channel 2 or 3 respectively).
9. PHONO/LINE SELECTOR. This switch allows to select the audio level applied on channel 4 (LINE
level or PHONO level)
10. UNBALANCED LINE INPUTS. To connect stereo audio from LINE devices like CD players, VCRs,
etc. in channels 4 (Line or Phono), 5, 6 and 7.
12
11
13
3
9
10
8
User Manual/Manual de Uso
7 6
5
3
4
MMX 65
2
1
Tabla de contenido
