Kärcher FR 50 Manual De Instrucciones página 10

Operating Instructions
Nozzle packages
Warning!
The required nozzle packages are
adapted to the corresponding
connecting device and must be
ordered separately.
High pressure
cleaner
with flow volume 650-850 l/h
Nozzle package 2.639-187
High pressure
cleaner
with flow volume 850-1100 l/h
Nozzle package 2.640-442
High pressure
cleaner
with flow volume 1100-1300 l/h
Nozzle package 2.639-188
High pressure
cleaner
with flow volume 1300-1800 l/h
Nozzle package 2.640-781
High pressure
cleaner
with flow volume 1800-2200 l/h
Nozzle package 2.640-282
Assembly of nozzle
package
Fig. 1
Note:
Follow the order!
■ Insert the O-ring (1) in the
groove of the rotation arm
■ Mount the nozzle (2)
■ Tighten the nozzle lightly with
the union nut (3)
Fig. 2
Warning!
The jet must be aligned parallel to
the rotation arm
■ Align the key area of the nozzle
(wrench size 10) parallel to the
rotation arm
■ Tighten the union nut (wrench
size 22) with a wrench
Floor cleaning
Fig. 3
The unit is equipped for connecting
a long hand gun (a).
To connect a short hand gun (b)
the nipple (c) must be replaced
with the nipple enclosed to achieve
best possible ergonomics.
Note:
Coat the O-ring seal of the nipple
with the grease provided before
assembling.
Fig. 4
■ Connect the hand gun of the
high pressure cleaner to the
unit and tighten by hand
Remove the wheel set
(if necessary)
Fig. 5
■ Leave the steering rollers fixed
to the holder
■ Unscrew the holder from the
unit
■ Fix the screws back on the unit
(to stabilise the brush insert)
English
Cleaning agent suction
With unheated high pressure
cleaner
Fig. 6
– Turn the valve clockwise to the
stop, the unit operates with high
pressure without cleaning agent
– Turn the valve anticlockwise to
the stop, the unit operates with
low pressure, the cleaning
agent is sucked up (dosing on
the high pressure cleaner)
With heated high pressure
cleaner
– Turn the valve clockwise to the
stop The cleaning agent dosing
is set on the high pressure
cleaner
Care
– Protect from frost
– Oil the steering rollers regularly
– Do not bend the brushes when
storing
10