HiWatch DS-H1 G Serie Guía Rápida página 4

EN-Quick Guide
This document introduces the procedure of using the digital/network video recorder.
Step 1. Install the HDD.
1) Loosen the screws and remove the cover.
2) Connect the data cable and power cable to the HDD.
3) Place the HDD on the bottom of the device and fix it.
4) Re-install the cover of the DVR/NVR and fasten screws.
Note: The HDD installation steps vary according to different models.
Step 2. Connect peripheral devices to the DVR/NVR.
Step 3. Power on the DVR/NVR.
Step 4. Activate the DVR/NVR for initial access. Input a strong password and confirm it.
Step 5. Log in to the DVR/NVR. Input the admin password.
Step 6. Follow the Setup Wizard to configure the network, IP cameras, etc..
3