VLUV QoQa Manual Del Usuario página 19

3.5 The PVC inner-ball
The PVC inner-ball is, as a whole, smaller than the VLUV ball-casing. The inner-ball is, however, very elastic and
tear resistant. Should you, during inflation, have the impression that the inner-ball is too hard and could burst
before it fills the VLUV ball-casing, don't worry, this is not possible, since the PVC inner-ball is manufactured from
a special burst-proof material. Should the VLUV feel very hard after inflation, this will become suppler and softer
during the course of the first use.
3.6 Closing the VLUV
• Remove the pump and adapter and push the closing valve, with the pointed side first, as quickly as possible
into the valve hole.
• Press in the closing valve hard and completely, until no edges protrude.
When closing the zip, push in the PVC inner-ball under the puller in order to ease the closing.
G
Finally press the puller under the protective cover so that this cannot leave any scratches on the floor.
H
(VLUV VELT: push the puller under the felt side)
G H
19
ENGLISH
DE
EN
FR
IT
ES
NL