Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3
OPERATION
Fig.1
Stylus ass'y
Stylus guard
Fig.4
Automatic Operation
•
Remove the stylus guard from the stylus assembly (Fig.1)
•
Put a slipmat on the turntable. If needed, use the 45rpm adaptor (Fig.2)
•
Select the size selector to 30 or 17 cm (Fig.3)
•
Select the speed button to 33
•
Start: Gently push the PLAY button (Fig.5). The turntable will start and the tonearm automatically will
move to the lead-in groove. When the record has finished playing, the tonearm will automatically
return to the tonearm rest and the turntable will shut off
•
Stop: To stop playing the record before it reaches the end, press the STOP button (Fig.6). The
tonearm will lift and return to the tonearm rest, and the turntable will shut off
•
Cue up/down: To pause the record before it has completed playing, press the cue up button to
pause playing. Press the cue down button to continue playing the record (Fig. 7)
•
Record:
Rec. select to AUX
Recording to your USB stick
a. Insert a flash-disk (e.g.memory stick, MP3 player) into the USB slot
b. Connect any audio source
c. Adjust the Aux level
d. Press the "RECORD" button and wait until the LED will flash (this may take several seconds
depending on the contents on the flash-disk)
e. Press the "RECORD" button again to stop the recording process
f. The track is now stored on the flash disk as an 192kbps MP3 file, tracks will be numbered in
sequence and placed into a folder called "audio"
Fig.2
Stylus ("needle")
Fig.5
1
/
or 45 rpm (Fig.4)
3
45rpm adaptor
Fig.6
6
Fig.3
30
7
Fig.7
Tabla de contenido
