Commissioning Your Wine Cabinet; Iii-B Temperature Setting; Iv-B Temperature Setting - PURE EuroCave Modo De Empleo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
6 - c
ommissioning youR Wine cABinet
III-A. Description (3-temperature model E-Pure-M, E-Pure-L)
A
B
C
D
E
F
G
P
O
N
M
A
Lighting mode
B
Open door alarm
C
Maturing compartment temperature zone (main
compartment of the cabinet)
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Red serving temperature compartment temperature
zone (upper compartment of the cabinet)
H
Confirmation and setting access key
III-B. Temperature setting
Maturing compartment recommended temperature setting range: 10 to 14°C / 50 to 57°F.
Red serving temperature compartment recommended temperature setting range: 16 to 20°C / 61 to 68°F. The chilling
compartment temperature is determined by the temperature set in the maturing compartment.
5 sec.
Press and hold down the
key for 5 secs to power up.
1
Press and hold down the
key for approximately 5 secs.
The display will start to flash.
3
Press the
button to confirm.
The red serving temperature compartment temperature display
will flash.
16
GB
H
I
J
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
L
K
I
Setting and selection keys
J
Lighting mode access and confirmation key
K
Charcoal filter meter access key
L
Power button
M
Red serving temperature compartment temperature
display
N
Hot circuit indicator
O
Cold circuit indicator
P
Maturing compartment temperature display
2
Press the
or
keys to set the desired temperature
in the maturing compartment.
4
Press the
or
keys to set the temperature of the red
serving temperature compartment.
5
Press the
button to confirm.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
For the maturing compartment, the default setting is 12°C / 54°F (ideal
maturing temperature). However you can set the temperature between
9 - 15°C / 48 - 59°F.
For the red serving temperature compartment, the default setting is
18°C / 64 °F (ideal temperature for bringing red wine to the correct
serving temperature). However you can set the temperature between 15
- 22°C / 59 - 72°F.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 12 - 25 °C / 54 - 77°F.
6 - c
ommissioning youR Wine cABinet
IV-A. Description (multi-temperature model S-Pure-S, S-Pure-M, S-Pure-L)
A
B
C
D
E
F
C
O
N
M
L
A
Lighting mode
B
Open door alarm
C
Temperature zones concerned
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys
IV-B. Temperature setting
Recommended temperature setting range for the lowest temperature: 7 - 9 °C / 45 - 48 °F.
Recommended temperature setting range for the highest temperature: 17 - 20 °C / 63- 68 °F.
5 sec.
Press and hold down the
key for 5 secs to power up.
1
Press and hold down the
key for approximately 5 secs.
The display will start to flash.
3
Press the
button to confirm.
The right-hand display will flash.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
G
H
I
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
K
J
I
Lighting mode access and confirmation key
J
Charcoal filter meter access key
K
Power button
L
Highest temperature in cabinet display
M
Hot circuit indicator
N
Cold circuit indicator
O
Lowest temperature in cabinet display
2
Press the
or
keys to set the desired temperature.
4
Press the
or
keys to set the desired temperature.
5
Press the
button to confirm.
For the lowest temperature, the default setting is 8 °C / 46°F. However
you can set the temperature between 5 - 12 °C / 41 - 54°F..
For the highest temperature, the default setting is 18 °C / 64°F..
However you can set the temperature between 15 - 22 °C / 59 - 72°F.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 12 - 35 °C / 54 - 95°F.
17
GB
Tabla de contenido
loading

Productos relacionados para PURE EuroCave

Tabla de contenido