Installing A Memory Card; Turning The Camera On And Off - LEXIBOOK DJ041 Serie Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Please refer to image G.

Note: This camera has an in-built photo memory for 1 test picture only. Your test picture will be removed when

the camera is turned on or off.

You need to insert an SD card (32GB maximum, not included) so you can store your pictures.

1. Turn the camera off.

2. Push the SD card firmly into the SD slot until you hear a 'click' sound.

3. Turn the camera on and the

Note:

• To remove the card, push it in slightly to release it from the slot.

• We recommend that you purchase a good quality SD card.

Follow these instructions to install the camera driver and application software on your PC system.

1. Insert the CD Software (included) into your CD-ROM drive. The CD will auto run, and the following screen will

appear:

Click on 'Install AP' on the 'Digital

Camera Install Menu' window and select

a language from the drop down list.

When the installation is completed, a confirmation window will be displayed. Un-tick the 'Start the application'

option and click the 'Finish' button to close the installation menu. Now you can install the camera driver.

2. Click on 'Install Driver', then follow the instructions to install it. You will need to reboot your computer after

the driver installation.

Note:

• You must install the driver before downloading photos from the camera.

• Make sure the camera is not connected to your computer before installing the software.

• If the CD does not auto run, click 'Start', 'Run', then type in 'D:\autorun.exe' in the Run dialog text box (where

D:\ is your CD-ROM drive) and press Enter.

Press and hold the Power button [12] to turn the camera on or off. The LCD screen lights up when the camera

is on.

Note: The camera will auto power off after 60 seconds of inactivity.

DJ041_IM1061_11Feb11.indb 12