Vented Installation - Indel Webasto Marine Divino The One Instrucciones Para La Instalación Y El Uso

• Ensure the base and sides of The One are not obstructed;
• Ensure the base and sides of The One are not located in an area
where they are vulnerable to damage or obstruction.

9.1 Vented installation

Voids that are less than 0,11m
or into ambient air to allow for better airflow circulation.
The vent should have an area of at least 9000 mm
placed in the back panel.
This example requires a vent:
0,3m x 0,3m x 0,8m = 0,072m
Pease bear in mind, when studying the ventilation, to respect the
basic principles: air intake at the bottom of the installation area and
air exhaust at the top.
In case a unique venting grid is feasible, performances of the device
can be enhanced by avoiding air short cycling as per the picture. In
this case, a vertical grid is recommended.
22
require a small vent into another void
3
3
User Manual
and is usually best
2