Manuales relacionados para Ingco RS4508
Resumen de contenidos para Ingco RS4508
- Página 1 Rotary Sander Rotary Sander LIJADORA ROTO ORBITAL RS4508 URS4508 ingcoglobal INGCO GLOBAL...
- Página 2 2|English The symbols in instruction manual and the label on the tool Double insulated for additional protection. Read the instruction manual before using. CE conformity. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
- Página 3 3|English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Página 4 4|English a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
- Página 5 5|English and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Página 6 6|English Residual risks Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the power tool’s construction and design: a) Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained.
-
Página 7: Electrical Safety
Save all warnings and instructions for future reference. Thank you for purchasing this INGCO professional power tool. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool. - Página 8 8|English b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in.
-
Página 9: Tool-Specific Safety Warnings
9|English situation. Service I) Have your power tool serviced by a qualified repair person using only. Identical replacement parts. Have your power tool serviced by a qualified repair person using only identically replacement parts. This will ensure that the safety of the power tool is maintained. Tool-specific Safety Warnings --Use the machine only for dry sanding. -
Página 10: Double Insulation
10|English Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: --Lead from lead-based paints. --Crystalline silica from bricks and cement and other masonry products. --Arsenic and chromium from chemically treated lumber. -
Página 11: Technical Data
“live” and shock the operator. We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or standardization documents: EN 60745. Technical Data Model No. RS4508 URS4508 Rated input power 450W 450W Rated voltage... -
Página 12: Know Your Product
12|English Know your product 1 2 3 Component list 1 On/off switch 2 Variable speed selector wheel 3 Switch lock button 4 Auxiliary handle lock knob 5 Auxiliary handle 6 Sanding base 7 Dust box Accessories: 1 pcs 150mm pad fixed on the machine 1 pcs 150mm sand paper 1 pcs dust box Switch off the sander and disconnect it from the power point. - Página 13 13|English FITTING THE SANDING PAPER (SEE DIA2) Fit the sanding paper over the base. Make sure the sanding paper is even with the edges and that the dust collection holes in the base and sanding paper is aligned and that the sanding paper is taut on the base.
- Página 14 14|English Dia4 VARIABLE SPEED CONTROL SELECTOR (SEE Dia5) The maximum speed can be altered by turning the speed selector wheel. Turn clockwise to increase and anti-clockwise to decrease speed. The speed of the drill varies with the amount of pressure applied to the on/off switch (trigger), i.e. more pressure for higher speed Dia5 ADJUST THE AUXILIARY HANDER(SEE DIA6)
-
Página 15: Maintenance, Troubleshooting
15|English DIA6 Maintenance, Troubleshooting Working hints for your sander 1. Your sander is useful for working on wood, metal, painted surface. It will smooth surfaces prior to painting, even where fillers have been used and left proud. 2. Your sander is best suited to large flat areas such as doors but can also be used on skirting boards, windows, etc, provided they are accessible. - Página 16 16|English Troubleshooting 1. If your sander will not operate, check the power at the mains plug. 2. If the sander does not abrade surface, checking the sanding paper. If the sanding paper have been worn, replace the new paper and try again. The paper must be kept in a dry place, if it is allowed to become damp, the abrasive particles will lose their adhesion to the backing paper and will not abrade.
- Página 17 17|English RS4508,URS4508...
- Página 18 18|English RS4508,URS4508 Part Description Part Description Bearing 608 Label Rotor Assembly Screw St4.2×19 Bearing 629 Screw M4×10 Right Housing Bearing Pedestal Bolt M4X45 Bearing 6002 Right Grip Washer Left Grip Spring Washer Slector Knob Screw M5×18 Carbon Brush Base Switch...
- Página 19 19|Español Reglas Generales de Seguridad !ATENCION! Lea estas instrucciones. La no observacion de todas las instrucciones relacionadas a continuacion puede dar comoresultado un choque electrico, fuego yo una lesion seria. El termino. Herramienta electrica. En todas las advertencies listadas a continuacion se refiere a las herramientas que almenta en funcionamiento o a las herramientas alimentadas por baterfa( sin cable).
- Página 20 20|Español d) Retire llave o herramienta antes de arrancar la herramienta electrica. Una llave o herramienta dejada unida a una pieza rotativa de una herramienta electrica puede causer un dano personal e) No se sobrepase. Mantenga los pies bien asentados sobre el suelo y conserve el equilibrio en todo momento.
-
Página 21: Datos Técnicos
21|Español DATOS TÉCNICOS RS4508 URS4508 Potencia nominal 450W 450W Voltaje 220-240V~ 110-120V~ Frecuencia 50/60Hz 60Hz Velocidad sin carga 4000-13000/min 4000-13000/min 150mm 150mm(6˝ ) Dimensión de la base Peso 3.0kg 3.0kg Nivel de presión Sonora Lpa=89dB(A) Lpa=89dB(A) Nivel de potencia Sonora... -
Página 22: Operación
22|Español Operación MONTAJE DE LA papel de lija (VER DIA2) Coloque el papel de lija sobre la base. Asegúrese de que el papel de lija es incluso con los bordes y que los agujeros de recolección de polvo en la base y el papel de lija alineados y que es el papel de lija es tensa en la base. -
Página 23: Velocidad Variable De Seleccion De Control (Ver Dia5)
23|Español VELOCIDAD VARIABLE DE SELECCION DE CONTROL (VER Dia5) La velocidad máxima puede ser alterado por girar la rueda de selección de velocidad.Gire a la derecha para aumentary en sentido antihorario parareducir la velocidad. La velocidad del taladro varía con la cantidad de presión，aplicada a la de encendido / apagado (disparador), es decir, más presión, para aumentar la velocidad Dia5... - Página 24 24|Español El mantenimiento, solución de problemas Trabajo consejos para su lijadora 1. La lijadora es útil para trabajar en madera, metal, la superficie pintada. Será de superficie lisa antes de pintar, incluso cuando se han utilizado de relleno y se fue orgulloso. 2.
- Página 25 25|Español autorizado para su reparación. Limpieza 1. Mantenga la herramienta del aire de las rejillas de obstrucciones y limpias en todo momento 2. Elimine el polvo y la suciedad con regularidad. La limpieza se realiza mejor con un cepillo suave o un trapo. 3.
- Página 26 INGCO TOOLS CO.,LIMITED No.45 Songbei Road,Suzhou MADE IN CHINA Industrial Park,China. 0820.V02 RS4508 URS4508...