Robot Roomba j7+ Guia Del Usuario página 15

Replacing the Bag
1
Lift up on the canister lid to open.
EN
2
Pull up on the plastic card to remove
the bag from the canister.
Note: This will seal the
bag so dust and debris
cannot escape.
10 For more information, visit global.irobot.com
3
Discard the used bag.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making
sure it is completely closed.
Note: To achieve optimal performance
with your robot and automatic dirt
disposal, clean and/or replace your
robot's filter as needed.
Cleaning the Visual Docking
Target and Charging Contacts
Inspect the visual
docking target and
charging contacts
to make sure
they are clear of
debris. Wipe with a
clean,dry cloth.
Note: Do not
spray cleaning
solution directly
onto sensors
or into sensor
openings.
Removing Debris from
Blower Cover
Inspect blower
cover for any lint
or debris built-
up, and wipe with
a clean dry cloth
to remove.