Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HARDWARE CONTENTS (shown actual size)
AA
Screw
Qty. 2
WARINGS AND CAUTIONS
• Two adults required for safe assembly. Use care when handling.
• Do not allow children to climb or play in or around the shelf.
• Assemble on a soft surface, such as carpeting, to avoid scratching the finish.
• Each shelf holds up to 170 lbs., evenly distributed.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tool Required for Assembly (not included): Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
1. Assemble four corner poles by attaching
upper poles (B) to lower poles (C) with
couplings (F) as shown. Then, attach
end caps (G) to upper poles (B), attach
casters (I) to lower poles (C), one on each
lower pole (C). Tighten with
wrench (BB).
1
F
BB
Hex Wrench
(not shown to size)
Qty. 1
G
B
C
BB
I
2. Locate the desired position of the bottom shelf
(A). Insert a plastic tapered lock (H) into the
appropriate groove, two on each pole. Make sure
the tapered end of the lock faces up. Place the
shelf (A) on its side and slide each pole with
the tapered lock through the bottom of the shelf
corner, pushing until snug.
After all poles are in place, position the unit
upright. Push down on each corner of the
shelf (A), making sure the shelf is in the fully
locked position. Repeat the process for the top
shelf (A), attaching the shelf (A) to the top end
of the poles. Attach each end of the post (D)
to the bottom of the top shelf (A) with
hangers (E) and secure with screws (AA).
2
H
3
A
D
AA
Lowes.com
E
Tabla de contenido
