iSi Soda Siphon Manual Del Usuario página 11

Instruction manual
NOTE: Disassemble the device into the individual product components
before using it for the first time. Carry out basic cleaning as described
under "Thorough cleaning" on page 15.
PRIOR TO FILLING
1.
Insert the measuring tube into the bottle so that it is flush with the
opening of the neck of the bottle.
NOTE: Never fill the bottle without inserting the measuring tube first.
FILLING
2.
Fill the siphon with cold water until water spills out of the measuring tube.
NOTE: Do not attempt to tilt or shake the bottle to allow even more water
to be poured in.
NOTE: Only fill the iSi Soda Siphon with pure water. Do not use any
flavoring syrups, juices, alcohol, etc.
ChARGING
3.
Insert the riser tube with gasket into the bottle through the measuring tube.
4.
Screw the siphon head onto the bottle so that it is straight and sealed
tightly so that the thread can no longer be seen.
WARNING Never attach the siphon head so that it is crooked.
5.
Insert 1 original iSi soda charger into the charger holder as shown
in figure 5.
6.
Screw on the charger holder (with charger inserted) to the siphon head
until you hear all of the contents of the charger release into the bottle.
English
12