Enlaces rápidos
Important:
1. Check the Rhino-Rack website to ensure you have the latest issue of these instructions.
2. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
3. Check the contents of kit before commencing fitment and report any discrepancies.
4. Place these instructions in the vehicle's glove box after installation is complete.
5. These instructions must be followed for warranty to be upheld.
Fit Time: 180 min
Rhino-Rack, 22A Hanson Pl, Eastern
Creek NSW 2766, Australia
(+61) 8846 1900
rhinorack.com.au
Jeep JT Gladiator Backbone - RJTB1
CONTROLLED
Document No: R2436
Issue No: 01
Issue Date: 30/01/2020
Page 1 of 6
Page 1 of 5
Manuales relacionados para Rhino-Rack RJTB1
Resumen de contenidos para Rhino-Rack RJTB1
- Página 1 Jeep JT Gladiator Backbone - RJTB1 Important: 1. Check the Rhino-Rack website to ensure you have the latest issue of these instructions. 2. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
- Página 2 Jeep Gladiator Backbone System weight - 8.4kg/18.5lbs. (Refer to Page 3) When using a roof top tent, ensure ladder is well supported on the ground to help support tent. Take extreme caution when climbing heights above 1.2m/4ft. Page 2 of 17...
- Página 3 It is your responsibility to ensure these fitting instructions are given to the end user or client. These instructions remain the property of Rhino-Rack Australia Pty. Ltd. and may not be used or changed for any other purpose than intended.
-
Página 4: Capacidad De Carga
Jeep Gladiator Backbone Capacidad de Carga 100kg/220lbs (66kg/ 145lbs Capacidad máxima de carga para el Sistema = carretera sin sellar). Revise el manual del propietario de su vehículo para la capacidad máxima de carga. Por favor asegúrese de solo usar la cantidad máxima de carga para el techo permitida por el manufacturero, si es menor que lo enlistado en la siguiente tabla. - Página 5 Jeep Gladiator Backbone Page 5 of 17...
- Página 6 Jeep Gladiator Backbone 10 2 Page 6 of 17...
- Página 7 Jeep Gladiator Backbone Parts list - Lista de partes Item Item M6 x 65mm button head screw M6 x 65mm button head screw M6 x 16mm flat washer M6 x 16mm flat washer M6 rubber washer M6 rubber washer Spacer bushing Spacer bushing Front left casting M6 x 16mm hex screw...
- Página 8 Jeep Gladiator Backbone 11 13/16” 7 7/8” 300mm 200mm Page 8 of 17...
- Página 9 Jeep Gladiator Backbone (T4) - Do not discard. - No descartes. 12 14 12 14 6.5mm 11mm Page 9 of 17...
- Página 10 Jeep Gladiator Backbone 12 14 6 . 5 12 14 (T5) (T6) 6mm / 1/4” (T5) 12 14 (T7) 8.5mm / 5/16” Page 10 of 17...
- Página 11 Jeep Gladiator Backbone (T8) 16 19 Page 11 of 17...
- Página 12 Jeep Gladiator Backbone (T4) - Factory bolt. - Perno de fábrica. 8-10NM 3-4LB/FT (T9) (T9) 12 14 Page 12 of 17...
- Página 13 Jeep Gladiator Backbone (T4) 4-5NM 3-4LB/FT - Simultainous - Simultáneo 5 11 11mm Page 13 of 17...
- Página 14 Jeep Gladiator Backbone (T5) (T5) (T6) (T6) 6mm / 1/4” 6mm / 1/4” 5 11 (T10) 12.5mm / 1/2” (T5) (T6) 6mm / 1/4” (T5) 5 11 (T6) 6mm / 1/4” Page 14 of 17...
- Página 15 Jeep Gladiator Backbone (T5) (T5) 40mm (T10) (1 9/16”) 12.5mm / 1/2” (T10) Roll-bar 12.5mm / 1/2” (T8) (T9) Page 15 of 17...
- Página 16 Jeep Gladiator Backbone (T4) 4-5NM 3-4LB/FT 5 11 4-5NM 3-4LB/FT Page 16 of 17...
- Página 17 Jeep Gladiator Backbone See corresponding platform instruction Ver instrucciones de plataforma correspondientes To remove canopy after assembly - Para retirar el dosel después del montaje Page 17 of 17...