Weekly Maintenance; Air Intake Filter Maintenance; Exhaust Air Filter Maintenance; Extraordinary Maintenance - Fimar FA15+ Manual De Uso Y Mantenimiento

AIR INTAKE FILTER MAINTENANCE

Carefully cleaning the air intake filter prolongs the life of the
appliance. Clean the filter, proceed as follows:
1. Do what is required to make sure the appliance is in a safe
condition (read the section "APPLIANCE
2. Raise the vacuum tank (1) lid using the handle (2) on the front of
the collection tank, turn the handle clockwise.
3. Using the handle (3), in the vacuum tank lid, remove the vacuum
tank lid from the collection tank (rotating it and shifting it as
indicated in the figure). Put the vacuum tank lid gently on the floor.
4. Take out the air intake filter from inside the collection tank (4).
1
2
1

EXHAUST AIR FILTER MAINTENANCE

Carefully cleaning the exhaust air filter prolongs the life of the
appliance. To clean the filter, proceed as follows:
1. Do what is required to make sure the appliance is in a safe
condition (read the section "APPLIANCE
2. Turn the catches (1) of the filter compartment lid anti-clockwise.
3. Remove the filter compartment lid (2) from the appliance.
4. Take the exhaust air filter (3) out of the appliance.
1
1

REPLACING THE POWER CABLE

To replace the power cable of the appliance, proceed as follows:
1. Do what is required to make sure the appliance is in a safe
condition (read the section "APPLIANCE
2. Raise the vacuum tank (1) lid using the handle (2) on the front of
the collection tank, turn the handle clockwise.
3. Using the handle (3), in the vacuum tank lid, remove the vacuum
tank lid from the collection tank (rotating it and shifting it as
indicated in the figure). Put the vacuum tank lid gently on the floor.
4. Turn the power cable catch (4) 180 degrees anti-clockwise.
1
2
1

WEEKLY MAINTENANCE

SAFETY").
3
2
SAFETY").
2
2

EXTRAORDINARY MAINTENANCE

SAFETY").
3
2
29
5. Clean the filter with a jet of air from a distance of at least 20 cm.
Replace it if damaged.
6. Repeat the operations in reverse order to reassemble all the
parts.
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands.
ATTENTION: The place this operation is carried out should comply
with current environmental protection regulations.
4
3
5. Clean the filter with a jet of air from a distance of at least 20 cm.
Replace it if damaged.
6. Repeat the operations in reverse order to reassemble all the
parts.
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands.
ATTENTION: The place this operation is carried out should comply
with current environmental protection regulations.
3
3
5. Remove the damaged cable.
6. Insert the new power cable plug (5) into the socket (6) on the
appliance.
7. Turn the power cable catch (4) 180 degrees clockwise, and
before doing this wind the cable inside its tear-proof housing (7).
4
3
7
5
6
4