Tabla de contenido
ceiling etc.
Additionally, there must be a free space of at least 50 cm on the sides between the device and any side walls, the tarpaulin and other
objects. There must also be at least 1.80 m between the control panel (5) and the ground surface. See figure 4. The heater must never
be hung from the hook in the wall as it could hang diagonally!
There are two methods of hanging the heater:
I. on the ceiling
II. on the frame (e.g. tent frame)
The device includes (figure 2):
- Chain with a ring at one end and a carabiner at the other end (1)
- An additional chain with carabiners at both ends of the chain (7)
- Metal expansion bolt with a hanging eye with a diameter of 8mm (8)
I. Ceiling mounting - figure 4A
The heater should be hung on a concrete ceiling. Never hang it on a ceiling made of wood, plaster or any other material! Fastening
materials and fire protection measures are not suitable for this type of installation. Look for a ceiling space that meets all these
requirements.
1. Drill a sufficiently deep hole with a diameter of 8 mm.
2. Drive the metal screw with the hanging eye into the hole. Secure the bolt by turning it clockwise (then the metal parts of the bolt will be
expanded into the concrete). See figure 5. Check that the dangle eye is properly threaded into the screw. Make sure that the mounting
kit can support a weight of at least 15 kg.
3. Hang the heater on the hanging ear with a carabiner so that the heater is 40 cm from the ceiling.
4. Make sure the carabiner is properly locked.
I. Mounting on the frame elements (eg on the tent frame) - figure 4B
Make sure that the heater can hang freely from the chosen mounting point and that the mounting point is strong enough to support the
weight of the heater. Secure it properly so that it does not slip or move in any other way. Look for a place on the rack that meets all these
requirements.
1.Use the attached chain with carabiners on both ends to secure the device effectively:
1.A. Hook an additional chain on the end link of the hanging chain that was previously attached to the heater with a carabiner.
1.B. Wrap the chain around the frame once.
2. Then attach the second carabiner to the same link in the chain to ensure the required distance of 40 cm between the upper casing of
the heater and the frame / rack.
3. Check that the carabiner is properly closed and that the heater is securely attached. It shouldn't slip, fall or move at all!
WARNING! The upper casing of the heater must be at least 40 cm from the tarpaulin of the tent, frame or any other object!
The following applies to both methods: Route the power cord (2) along the hanging chain and secure it at several points with the cable
tie. The first tie needs to be attached to the third link as the first few links get hot. Make sure the cable is taut along the chain, but do not
hang the device on the cable! Route the power cord from the (hot) heater to the outlet.
PRODUCT DESCRIPTION (Figures 1 & 2 & 3)
1.A chain with a ring at one end and a carabiner at the other end
2. Power cord
6
Tabla de contenido
