Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
PACKAGE CONTENTS
Choosing the Right Location
Installation
1
ATTACHING THE SOLAR TOP HOUSING
TO THE GROUND STAKE
□ Align the ground stake (D)
to the screw (C) on the
solar top housing (A).
□ Attach the ground stake (D)
to the solar top housing (A)
by tightening the screw (C)
using a clockwise motion.
CAUTION: The ground stake
is sharp. Be careful when
handling to avoid injury.
3
ADJUSTING THE DIMMER SWITCH AND
SWITCHING COLORS
□ Using the dimmer switch (B) on the back
of the solar top housing (A) allows you to
adjust the focus of the Smart Focus™
Solar Spot Light.
□ Located under the solar panel, the Color Control
Button (E) allows you to manually cycle through
the colored LED options. You may also use the
use the remote (F) that is included.
NOTE: The remote (F)
functions best
within 5 meters
and at an angle
of 45°.
Safety Information
Please note the following important safety notes:
1. The ground stake is sharp. Handle with care to avoid injury.
2. Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.
3. Keep the solar panel free of dirt and debris.
4. Do not dispose of battery in fire. Dispose of batteries in accordance all local, state and
federal regulations.
Use and Care Guide
Color-Changing Spotlight
Part
Description
Solar Top Housing
A
B
Dimmer
C
D
Ground Stake
Color Contron Button
E
F
Your solar spot light should be installed in an area that gets DIRECT SUNLIGHT.
Your solar spot light will produce more hours of operation when installed in an
area which is free from cover, shade, or shadowing.
2
TURNING THE SWITCH "AUTO"
□ Put the switch, located under the solar panel,
to the AUTO position.
5
INSERTING THE SOLAR SPOT LIGHT ASSEMBLY
INTO THE GROUND
□ Push the solar spot light asembly
into the ground.
WARNING: Do not use hammer. If ground is
hard, use water to soften.
DANGER: Ground stake is sharp. Handle with
care.
IMPORTANT: Dispose of batteries in accordance
with all local, state and federal regulations.
Please contact 1-855-HD-HAMPTON for further assistance.
Item #xxxx xxx xxx
Model #10238
Solar Powered LED
Quantity
1
1
Screw
1
1
1
Remote
1
NOTE: Do not press hard on top
of solar top housing (A). This can
damage the solar light.
NOTE: Do not use a hammer.
If the ground is hard, use water
to soften.
HAMPTONBAY.com
Manuales relacionados para HAMPTON BAY 10238
Resumen de contenidos para HAMPTON BAY 10238
- Página 1 Item #xxxx xxx xxx Model #10238 Use and Care Guide Solar Powered LED Color-Changing Spotlight PACKAGE CONTENTS Part Description Quantity Solar Top Housing Dimmer Screw Ground Stake Color Contron Button Remote Your solar spot light should be installed in an area that gets DIRECT SUNLIGHT.
- Página 2 Replacing the Battery REPLACING THE BATTERY REPLACING THE BATTERY REPLACING THE BATTERY (CONTINUED) (CONTINUED) □ Re ove the solar top assembly □ Remove the screws from the bottom □ Remove the battery cover (1) on the (A) from the ground stake (D) by of the solar panel (A) using a screw- bottom of the solar panel (A).
- Página 3 Núm. de artículo xxxx xxx xxx Núm. de modelo 10238 Guía de uso y cuidado LED alimentado por energía solar Foco de cambio de color PAQUETE CONTENIDO Pieza Descripción Cantidad Carcasa superior solar Atenuador Atornille Estaca de suelo Botón de control del color Control remoto Su foco solar debe instalarse en un área que obtenga LUZ SOLAR DIRECTA.
- Página 4 Reemplazo de la batería REEMPLAZO DE LA BATERÍA REEMPLAZO DE LA BATERÍA REEMPLAZO DE LA BATERÍA (CONTINUACIÓN) (CONTINUACIÓN) □ Retire el ensamblaje del panel solar □ Retire los tornillos del fondo □ Retire la cubierta de la batería (1) (A) de la estaca de tierra (D) del panel solar (A) usando un en el fondo del panel solar (A).