Primus ONJA Manual Del Usuario página 7

turn off the stove.
pack up the stove before the burners and the pan supports have cooled
down. Check that burners are extinguished before disconnecting the gas
container.
1. Turn the stove off by twisting the gas supply knobs clockwise to the stop position. The valve
is closed and the gas flow is stopped when the flame goes out. Do not use excessive force
in turning off the supply; you may risk having problems when you try to turn on the supply
next time.
2.
When you have completely finished with the stove, and both burners
off, unscrew the gas cartridge from the stove
3. Fold up the stove and place the cutting board on the pan support. Secure the cutting board
to the shoulder strap.
MAINTENANCE OF THE STOVE.
important: Regular cleaning and overhaul will extend the life of
your stove. Do not try to repair screw threads or valves on the gas
cartridges or the stove yourself. If the stove needs to be repaired, please
contact Primus. You will find contact information on the back page of
this instruction booklet.
1. The stove should be wiped clean with a cloth and a mild cleanser, e.g. dish-washing liquid.
important:
Do not
have been turned
.
2. Examine the wooden parts. If they have been wet and have now dried, give them a lightly
application of oil.
3. Reassemble the stove completely when fully dry. The deepest part of the drip tray should
be closest to the lid.
IMPORTANT INFORMATION
CONCERNING GAS CARTRIDGES.
This appliance shall only be used with Primus 100 g, 230 g or 450 g single-use
cartridges (marked 2202xx, 2206xx and 2207xx respectively) . Attempting to attach
gas cartridges that are not designed for the stove can be dangerous.