Using The Product; Video Mode - nedis DCAM44BK Guia De Inicio Rapido

Connecting the product to a power source
Option 1:
1. Plug the auxiliary power plug A
2. Plug the other end of the auxiliary power plug A
8
A
Option 2:
• Charge the product using the USB port A
4
The product automatically switches on and starts recording when you switch
on your car engine.

Using the product

1. Press power button A
2. Press menu A
3. Press up A
4. Press A
5. Press A
4
The product automatically switches on and starts recording when you switch
on your car engine.
4
An indicator light blinks blue.
4
In the top left corner of the display A
red dot blinks.
4
The camera switches off after the engine is off.
4
The recording is automatically saved on the microSD card (not included).
Menu
1. Press Menu A
2. Press and hold A
4
The icon in the top left indicates the current operation mode.

Video mode

4 The video camera icon appears in the top left corner of the display A
1. Press A
2. Press A
4
An indicator light blinks blue.
4
If A
4
The product automatically saves recordings on the microSD card.
AM44BK_MAN_COMP_0520_print_(20089 1422)_v02.indd 8
.
9
e
for 3 seconds to switch to setup interface.
w r
or down A
9
to confirm the setting.
e
to exit the menu.
e
to enter the menu.
e
to switch between the video, photo and playback mode.
9
to start or stop recording.
r
to activate or deactivate audio recording.
7
is disconnected the camera stops recording.
7
into an auxiliary power outlet.
8
.
for 3 seconds to switch the product on or off.
to select the parameters.
t
the film camera icon appears and a
8
7
into the micro USB port
t
.
26-5-2020 15:41:03