Tabla de contenido
Idiomas disponibles
Idiomas disponibles
There are three different height of handle for you to choice.
K.Adjusting the footrest
To adjust the footrest ,press the buttons on either side and rotate as required.
L.Reclining the se sing at unit
Pull the lever bar gently in an upwards direction and recline the seat unit as required.
M.adjusting the front part of canopy
Adjust the canopy to the position as required.
N.reversing the seat unit
Push the buttons inwards as shown each side and lift the seat unit away from the frame.
Turn the seat unit around and replace into adaptors until you hear a 〝click〞.
Pull to make sure they are fully located.
O.baby facing forward folding
1. Move the second lock position.
2. Pull the lever bar gently on both side and pull in an upwards.
3. Push the handle downwards to right position.
4. Use the folding latch.
P.baby facing parents folding
1. Move the second lock position.
2. Pull the lever bar gently on both side and pull in an upwards.
3. Push the handle downwards to right position.
4. Adjust the seat recline and hood forward.
5. Use the folding latch
.
Use The Carry Cot (opcional)
Q.Assemble the carry cot
Take the carry cot out of the carton box.
To attach the carry cot simply pull out the two side clamps and the middle support bar and place the
carry cot in the middle of the frame so that eachmetal pin fits and clips in correctly to the openings
on each side of the frame.
To adjust the hood simply push the button locatedon the left front side of the hood and simply push
back or forward to your desired position.
Slide the foot cover over the front of the front of the carry cot and securely attach each press studs to
those on the hood section.
The hood section on the front can also be used as a carry handle make sure to only carry the basinet from
the handle part and no other section lf the hood.
R.Link with stroller
At the front of the seat near the frame on each side there is a black button.
Push the left button in first then push in the right side button and lift the seat from the frame. Put seat away.
Take the support bar and recline out so that you can attach it to the top part of the basket ,make sure it
clicks into place before proceeding.
English
Tabla de contenido
