Tabla de contenido
CONNECTING THE SPEAKER FOR TRIMODE OPERATION - NOTES
TRI MODE operation output allows a subwoofer to be operated in mono mode while the main speakers are playing in stereo. Leave
the crossover switch on "Full" position.
Use 100 volt, non-polar capacitors for a high pass crossover to filter out low frequencies and Air- core or
Ferrit- ore coils with a minimum diameter of 1 mm / 0.039" for the lowpass crossover to filter out high frequencies.
The capacitor and inductor values as written in the below table. The front and rear channels of this amplifier get this capability.
Only the rear left and right channels are shown on the following pictures.
Values for 6dB passive crossover
Frequency
Inductor
80 Hz
7,5 mH
100 Hz
6,5 mH
120 Hz
5,5 mH
150 Hz
4 mH
Capacitor
470 uF
330 uF
370 uF
220 uF
- 8 -
Tabla de contenido
