Notes When You Dispose Of Your M:robe; How To Remove The Built-In Battery - Olympus m:robe MR-500i Manual Básico

Notes when you dispose of your m:robe

Remove the built-in battery when you dispose of this product. Never disassemble this product except when
disposing of it.
Danger
• Do not allow the +/– terminals of the built-in battery to come in contact with metal objects,
or subject the built-in battery to strong shock. Also, do not carry or store with a necklace or hairclip,
etc. This may cause short-circuiting, resulting in overheating, explosion or fire.
• Do not heat, disassemble or modify the built-in battery, expose it to water, or leave it in
scorching heat. Doing so may cause over-heating, explosion or fire.
• Do not pierce with a nail, beat with a hammer, throw or step on the built-in battery. Doing so
may cause over-heating, explosion, fire or battery leakage.
• Before disposing, tape the connector of the built-in battery with insulating tape. Otherwise,
short-circuiting may occur, resulting in explosion or fire.
Warning
• Keep the built-in battery out of the reach of children. Failure to do so may cause accident or injury.
• When battery leakage has occurred and the liquid gets into your eyes, wash immediately
with clean water and seek medical attention immediately. Failure to do so may cause eye injury.

How to remove the built-in battery

1
Press and hold POWER until the LED flashes to turn off your m:robe.
2
Remove the screws at the side of device using the screwdriver.
Notes when you dispose of your m:robe
EN-37