Mount The Keypad - eufy Security T8960 Manual Del Usuario

ADDING THE KEYPAD TO THE
SYSTEM
Note: • Make sure you've first completed the setup of your eufy Security
HomeBase.
• Make sure the keypad is fully charged. A fully-charged keypad's battery
can last for 6 months per charge.
1. Go to Add Device, and then select Keypad to add it to your system.
2. Press and hold the SYNC button for 2 seconds until the LED indicator blinks
blue. This indicates that The Keypad is waiting to pair.
The LED indicator turns solid blue for 5 seconds to indicate the pairing is
completed.
3. Follow the on-screen instructions to complete the setup process.
Note: You can add up to 3 keypads to your HomeBase.
04 English
LED Indicator Description
Blinking blue Pairing to HomeBase
Solid blue Paired with HomeBase
Blinking red Not connected to HomeBase
Off Standby or pairing failed
MOUNTING YOUR KEYPAD

Mount the Keypad

To mount the keypad:
Option 1: Use the adhesive strips
1. Stick the adhesive strips on the keypad, and then tear off the removable film.
2. Stick the keypad onto the wall.
Option 2: Use the mounting screws
1. Slide the mounting bracket off.
English 05