Model: BPA-1031
MP3/WMA Player with FM transmitter
INTRODUCTION OF COVER
LCD Display
1. Music mode
2. Playback mode
3. Play sequence
4. EQ mode
5. AB repeat icon
6. Battery capacity
7. Lyrics/menu display
8. Track display
9. Time display
10-Lock icon
BASIC OPERATION
PLAY: Press and hold "PLAY" to power on, and enter the state of stop, press "PLAY" shortly to start to playback.
PAUSE: Under the state of playback, press "PLAY"; STOP: Under the state of playback or pause, press and hold "PLAY"
Power off: Under the state of playback, pause or stop, press and hold "PLAY" (about 3s) until it displays "Bye-bye".
Volume adjustment: Press "+" or "-" to increase or decrease the volume.
Previous/Next: Press "+" or "-" to skip to previous or next one.
FF/REW: Under the state of playback music, press and hold "M" to enter menu, select "SYS" and press "M" to confirm, and
then select the option of "FF/REW", press "M" to confirm and return to upper menu. Press and hold "+" or "-" to carry out the
function of ""FF/REW", press "M" to exit.
A-B Repeat: Under the state of playback music, press "REC" to set up the beginning point A, press "REC" again to set up the
end point B, press "REC" once again to cancel A-B Repeat.
EQ Mode: Under the state of playback music, press "M" to select the EQ mode, 6 modes included: Normal, Classic, Jazz, Rock,
Pop and DBS.
Repeat mode: Under the state of playback music, press "M" to enter menu and select the option of "Play mode", press "Menu" to
enter the status of play mode settings. Select the play mode by pressing "|◄◄" or "►►|": Normal, Repeat one, Repeat all,
Shuffle, Intro. Press "MENU" to confirm and return to previous menu.
Delete files: Under the stop state of music, press "MENU" to enter menu, it will display the option of "Delete files", press "M" to
confirm, press "+" or "-" to select "YES" or "NO".
Record: Under the stop state of music, press and hold "M" to enter menu, select "REC" and press "MENU" to start recording.
FM transmitter: Under the stop state of music, press "M" to enter menu, select the option of "Transmitter setup" and press