Work Area Safety - Beta 1368 Instrucciones

INSTRUCTIONS FOR USE
OPERATION MANUAL AND INSTRUCTIONS FOR STAPLE WELDER MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALIA
Original documentation drawn up in ITALIAN.
ATTENTION
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE STAPLE WELDER. FAILURE TO
COMPLY WITH THE SAFETY STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY.
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
The staple welder for repairing plastic parts can be used for the following purposes:
• repairing plastic parts, including car and motorcycle bodies
• repairing bumpers, wings etc.
The staple welder must not be used for the following operations:
• the staple welder must not be used with non-metal staples
• the staple welder should be used on neither fibreglass nor carbon fibre
• the staple welder must not be used at any temperatures other than those stated in the TECHNICAL DATA table
• the staple welder must not be used in environments containing potentially explosive atmospheres
• the staple welder must not be used in humid or wet environments, and must not be exposed to rain or snow
• the staple welder must not be used for any applications other than stated ones

WORK AREA SAFETY

Use the staple welder in a dry area, avoiding humidity.
Do not operate the staple welder in environments containing potentially explosive atmospheres, because sparks
may be generated, which can ignite the dust or fumes.
Contact with live equipment should be avoided, because electric shocks may be caused.
Keep children and bystanders away from your workplace while operating the staple welder. Distractions from
other people can cause you to lose control during use.
Do not use the staple welder near flammable material.
STAPLE WELDER SAFETY
Before use, check that the staple welder has not been damaged, and that there are no bare cables or worn parts.
Do not tamper with the electronic circuit of the staple welding device.
PERSONNEL SAFETY
Stay alert; watch what you are doing. Do not use the staple welder while tired or under the influence of drugs, alcohol, or
medication.
6
EN