Controls And Connectors - TC Electronic CLARITY M Guia De Inicio Rapido

nnectors

Controls and Connectors

(EN)
(1) Radar loudness meter showing
short-term loudness history,
momentary loudness and
program loudness.
(2) Detailed statistics overview
for all key loudness
measuring parameters
(3) State-of-the-art true peak
meter identifies clipping
in DACs, CODECs and
downstream filters.
(4) Downmix compliance meters
based on TC Electronic's
industry-standard loudness
measurement algorithms.
(5) Left-Right or Left-Right/LS-RS
Correlation Meter. This displays
the phase relationship of a
stereo signal, where the far
right (+1) position indicates
perfect phase, the center (0)
position shows the widest
acceptable divergence,
and measurements below 0
indicate out-of-phase material.
(6) Adjustment knob allows
various parameters to
be controlled.
(7) These selection buttons access
the corresponding functions
listed in the LCD display.
Holding the far right button
turns the unit on and off.
(8) The current source is displayed
on the front page. In plug-in
mode, the track name and
number where the plug-in is
inserted will be indicated here.
(9) High-accuracy real time
analyzer with 1/3 octave
resolution and pr. band zoom.
(10) Holes for mounting brackets
such as RAM-mount
(not included).
(11) Kensington lock.
(12) Power connection.
(13) Connector for included
breakout cable with 6 channels
AES inputs (stereo version has
2 AES channels).
(14) USB connection for plug-in
metering, preset exchange and
firmware updates.
(15) Stereo optical input.
17
Quick Start Guide