Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Please read the manual carefully before you start assembling
Please inspect box contents to ensure you have received all components
Note: the black circular plastic tops in between the shelves are used only for packaging purposes.
They are NOT NEEDED. Please discard.
D
C
C
Locate the desired position of the bottom shelf (A). Ensure that it is no more
than 6 in. from the floor.
Place two tapered sleeves (B) into the appropriate groove on each pole
assembly. Make sure the "UP" arrow is facing up.
Place the shelf (A) on its side and slide each pole assembly with tapered locks
through the bottom of the shelf (A) until snug. Make sure that the shelf corner
cylinders are positioned over the slip sleeves.
After all pole assemblies are in place, position the unit in the upright position.
Push down on each corner of the shelf (A), ensuring the shelf (A) is in a fully
locked position.
UPSIDE (level side)
Note: the tapered sleeves must be at the same height for each pole
to ensure the shelf sit on the sleeves levelly.
Item #EH-WSTHDUS-006B
Model #1001298046
black plastic tops
B
HOMEDEPOT.COM
Please contact 1 (855) 439-4663 for further assistance.
Between 9 a.m and 4 p.m(Central Time) Monday to Friday
A
Manuales relacionados para HDX 1001298046
Resumen de contenidos para HDX 1001298046
- Página 1 Item #EH-WSTHDUS-006B Model #1001298046 Please read the manual carefully before you start assembling Please inspect box contents to ensure you have received all components Note: the black circular plastic tops in between the shelves are used only for packaging purposes.
- Página 2 1001298046 Favor de leer el manual con atención antes de comenzar el ensamble Favor de revisar el contenido de la caja para asegurarse que se han recibido todos los componentes Nota: las cubiertas circulares de plástico negro entre los estantes sólo se usan para propósitos de empaque.