Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9.- BASIC OPERATION:
9.1.- TURN ON/OFF:
1. Hold [
] for 1.5 seconds to turn ON.
2. Hold [
] again for 1.5 seconds to turn OFF.
9.2.- ADJUSTING THE VOLUME LEVEL:
The volume level can be adjusted using [VOL] and [▲] / [▼] key.
1. Push [VOL] once to enter the volume adjustment mode. Then press [▲] / [▼] key to
adjust the volume level.
● The "VOL" icon stars blinking.
● The transceiver has 31 volume levels and "OF" means off.
● When no key operation is performed for 5 seconds, then transceiver returns to normal
operation mode.
2. Push [VOL] key again to exit to normal operation mode.
9.3.- ADJUSTING THE SQUELCH LEVEL:
The squelch level can be adjusted using [SQL] and [▲] or [▼] key. In the order to properly
receive signals as well as for effectively scan, the squelch must be adjusted to the proper
level.
1. Push [SQL] once to enter the squelch adjustment mode, and then push [▲] or [▼] key
to adjust the squelch level.
● The "SQL" icon starts blinking.
● The transceiver has 11 squelch levels: OP is completely open; 10 is tight squelch.
● When no key operation is performed for 5 seconds, the transceiver returns to the normal
operation mode.
2. Push [SQL] again to exit to normal operation mode.
9.4.- TRANSMITTING / RECEIVING:
9.4.1.- Transmitting:
1. Push [H/L] key to select output power.
● "LOW" appears when low power is selected.
● Indicates the selected operating channel number.
● In set mode indicates the options of setting item.
● In dual watch/tri-watch, appears CH16 during priority scan.
● Appears volume level while volume setting.
● Appears squelch level while SQL setting.
● Appears corresponding items while mode setting.
● Show the squelch level.
● "SQL" blinks while setting.
● Show the volume level.
● Bar indicator rolling show when max volume.
● Blinks when the volume mute is activated.
● "VOL" blinks while setting.
English - 13 -
Capítulos
Tabla de contenido
Solución de problemas
