Programação Inicial / Initial Programming / Programación Inicial - En - JNF IN.27.400 Manual Del Usuario

Programação inicial / Initial programming / Programación inicial - EN
Reset: Delete all the users information
(Necessary to do in the first installation)
Keep presssing the Reset button until the green light turns on
Press # until the lock confirm "Succeed"
If keep pressing more than 5 seconds the operation fails and the green light turns off
Note: The lock leave factory of aſter resetting will create a temporary password: 11111111
2
Create new master:
(Touch the key pad to wake up the lock)
2.1 - Master password
10# → 11111111# → (wait until lock confirm succeed)
"Input New Master Password" # → (lock confirm succeed)
2.2 - Master fingerprint (optional)
10# → "New master password" # → (wait until lock confirm succeed)
Put fingerprint on the upper reader (lock will ask to repeat 3 times until confirm succeed)
2.3 - Master card (optional)
10# → "New master password" # → (lock confirm succeed)
Approach new Mifare card → (wait until lock confirm succeed)
Notes:
-If the user limit is reached, the red light will flash
-Password should be 3-12 digits
-If the password is 12 digits, you don't need to input # to confirm
3
Create normal user (OPTIONAL)
(Touch the key pad to wake up the lock)
3.1 - Normal user password
20# → (New master password)# → (wait until lock con rm succeed)
"Input user Password" # → (lock con rm succeed)
3.2 - Normal user ngerprint (optional)
20# → "New master password" # → (wait until lock con rm succeed)
Put ngerprint on the upper reader (lock will ask to repeat 3 times until con rm succeed)
3.3 - Normal user card (optional)
20# → "New master password" # → (lock con rm succeed)
Approach new Mifare card → (wait until lock con rm succeed)
Notes:
-If the user limit is reached, the red light will flash
-Password should be 3-12 digits
-If the password is 12 digits, you don't need to input # to confirm
4
Delete master / normal user
(Touch the key pad to wake up the lock)
30# → "Master user" # → Input master / normal user (password / ngerprint / card) that need to delete
Note: Cannot delete Master user used to enter in the programation. Red light will ash
5
Delete all normal user
(Touch the key pad to wake up the lock)
50# → Master User # → Master User #
-Press * to return to superior menu. Press 2 times to exit menu
Manual de instalação / Installation Manual / N otice d'instructions / Manual de instalación -
RESET
MI0341-1 www.jnf.pt 06/16