Tabla de contenido
Idiomas disponibles
Idiomas disponibles
persons unfamiliar with the power tool or these instructions to
operate it. Power tools are dangerous in the hands of untrained
ES
users.
▶Maintain power tools. Check for misalignment or jammed moving
parts, breakages and any other condition that might affect the power
tools operation. If it is damaged, the power tool must be repaired.
PT
Many accidents are caused by poorly maintained power tools.
▶Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to jam and are easier
to control.
EN
▶Use the power tool, accessories and cutting tools etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
FR
▶Keep the handles and grips dry, clean and free of oil and grease.
Slippery handles and gripping surfaces do not allow safe operation
and control of the power tool in unforeseen situations.
5) SPECIAL TREATMENT AND USE OF ACCUMULATOR
OPERATED TOOLS
▶Charge batteries only in chargers recommended by the
manufacturer. If a charger indicated for a specific type of battery is
used with different batteries, there is a risk of fire.
▶Use only the batteries intended for this in power tools. The use of
other batteries can cause injury and risk of fire.
▶When not in use, keep the battery away from clips, coins, keys,
nails, screws, or any other small metal objects that can cause the
contacts to bridge. Shorting the battery contacts can result in burns
or fire.
▶If it used incorrectly, liquid may leak from the battery. Avoid contact
with it. In case of accidental contact, wash with water. If the liquid
comes contact with eyes, seek medical help. Liquid emanating from
the battery can cause skin irritation or burns.
▶Do not use damaged or modified batteries or tools. Damaged or
modified batteries can behave unpredictably and cause a fire,
explosion, or risk of injury.
▶Do not expose a battery pack or power tool to fire or too high a
temperature. Exposure to fire or temperatures over 130 ° C can
cause an explosion.
▶Follow all instructions for charging and never charge the battery
or power tool at a temperature outside the corresponding range
specified in the instructions. Improper charging or temperatures
outside the specified range can damage the battery and increase
the risk of fire.
6) SERVICE
▶Have the power tool repaired by an electrician using original spare
parts. This ensures the safety of your power tool.
▶Do not repair damaged accumulators. Battery maintenance must
only be carried out by the manufacturer or an authorized technical
service.
Instruction manual
▶Keep these safety instructions well kept!
SAFETY INSTRUCTIONS FOR CORDLESS
SCREWDRIVERS
▶When you are not using the machine, set the direction of rotation
switch (4) to the center position to prevent it from starting
accidentally.
▶Use only the supplied charger to charge the battery.
▶Only use the charger indoors and avoid any humidity or rain water.
▶In the event that the charger casing shows evidence of damage,
take it to a specialized workshop to have it checked and repaired or
replaced if necessary.
VIBRATION INDICATIONS
▶The level of vibrations indicated in these instructions has been
determined according to the measurement procedure established in
the EN 62841 standard and can serve as a basis for comparison with
other devices.
▶The level of vibrations may vary according to the respective
application of the power tool, and in certain cases it may be above
the value indicated in these instructions. The stress experienced by
vibrations could be higher than expected if the power tool is used
regularly in this way.
▶Observation: To accurately determine the stress experienced by
vibrations during a given working time, it is necessary to consider
those times in which the device is switched off, or is in operation,
but not being used. This can lead to a drastic decrease in vibration
stress during the total working time.
ref. 08723
Tabla de contenido
