Sanus LR1A Manual De Instrucciones página 2

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Thank you for choosing the LR1A in-wall mount.
The LR1A in-wall mount is designed to be used with VSF415 or MF215 adjustable arm wall mounts. Range of motion and size limitations will vary
depending on the adjustable arm wall mount selected; the maximum extension of the arm will be reduced by 9 cm (3 1/2 in.) when using the LR1A.
VSF415
: The weight of the monitor and adjustable arm wall mount must not exceed 22.7 kg (50 lb).
MF215
: The weight of the monitor and adjustable arm wall mount must not exceed 27.2 kg (60 lb).
CAUTION:
Avoid potential personal injuries and property damage!
●
Do not use this product for any purpose not explicitly specified by manufacturer.
●
The wall must be capable of supporting five times the weight of the monitor and mount combined.
●
This product is designed for use in wood frame walls only!
●
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product,
contact manufacturer Customer Service or call a qualified contractor.
●
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
WARNING:
DO NOT INSTALL THIS ACCESSORY IN A FIREWALL. Contact your local building inspector before cutting a hole in the
drywall if unsure.
Tools
Needed
2
7/16 in.
1/8 in.
(11 mm)
(3 mm)