Eaton Cooper Lighting Metalux MMS Instrucciones De Instalación

ADF140688
Installation Instructions – Modular F-Bay - Motion sensor
Instructions d'installation – F-Bay modulaire - Détecteur de mouvements
Instrucciones de instalación para el sensor de movimiento de salida
de alimentación modular
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
warning
risk of Fire/Electric Shock. if not qualified, consult an
electrician.
warning
risk Electric Shock. Disconnect power at fuse or circuit
breaker before installing or servicing.
INSTALLATION
1. Remove cover from connector located in the access plate.
2. Adjust settings in motion sensor accordingly and attach
it to the endplate through the key holes in the enclosure
(screws provided in parts bag).
I5 and HB Luminaires will use holes on ends of enclosure.
Figure 1.
Figure 3.
3
4
warning
Edges May Cut. Handle with care.
n otee: Recommended for use with programmed rapid
start ballasts only.
Frequent switching of fluorescent lamps with
instant start ballasts has been shown to shorten
lamp life. Lamp manufacturers and Cooper Lighting
will not warranty lamps when they are being
operated in this situation.
3. Hook up the cord from the motion sensor to the
connector in the luminaire.
4. Hook up the cord/cord and plug from the motion
sensor to the power supply (sold separately).
Figure 2.
Figure 4.
Brand Logo
reversed out of
black
INS # INS #
To Power Supply