H
ERO
EASY INSTALLATION
INSTRUCTIONS
STEP 1
STEP 2
Remove your
Remove any
existing shower
remnants of old
head. To remove,
plumber's tape
turn the existing
and flush out
shower head in a
shower pipe for
counterclockwise
5 to 10 seconds.
direction.
STEP 4
STEP 5
In a clockwise
Attach end
direction, screw
of hose to
handheld holder
handheld holder
onto the taped
and hand
portion of shower
tighten.
arm. Hand
tighten only.
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never
been easier. With
the Hero's easy twist
design, simply rotate
the easy spray selector
for a quick spray change.
USING THE COMFORT CONTROL
Located on the back of the shower head, the comfort control
regulator eliminates sudden blasts of water. Note: The comfort control
is not a shut off valve. When turned to the lowest position, the shower
head continues to flow. This is a normal safety feature. Unit may be in
lowest flow position during shipping. Check the position of comfort control upon installation.
STEP 3
Wrap plumber's
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 6
Attach other end
of hose to base
of handheld and
hand tighten.
Insert your new
handheld shower
in holder.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST